The Ultimate Reloader Reloading Blog
**Update: I’ve heard of multiple experiences where Dillon has wanted to charge customers for this kind of service (fixes, etc). Your mileage may vary! In my last post, I documented the “Before” part of Lewis Curtis’ Dillon XL-650 No B.S. Warranty story. In this post, I’ll follow-up with what Dillon decided to do with Lewis’ […]
**Update: I’ve heard of multiple experiences where Dillon has wanted to charge customers for this kind of service (fixes, etc). Your mileage may vary! A friend of mine Lewis Curtis recently managed to negotiate a great trade on a used Dillon XL-650 outfit loaded with extras. It’s rare to find a good deal on these […]
One of the frequently debated topics related to rifle cartridge loading is what case lube to use. Now you have a chance to let us know what you use! Please drop a comment to describe why, or if your lube type is not on the list. Thanks, Gavin
In this post, I’ll finish covering the accurizing steps and experiments for the AR-MPR upper receiver- so far, we’ve covered the following: AR-MPR: Accurizing the Upper Receiver – Overview AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding Following the welding process, I carefully milled and measured the sides of the upper receiver […]
In my last post, outlined some ideas and goals for talking the slop out of the fit between the upper and lower receivers on the AR-MPR rifle. The first step is to remove the gaps between the sides of the upper receiver lugs, and the channels at the front and back of the lower receiver. […]
A while back, I posted some AR-MPR rifle accurizing plans. This was my first-pass at enhancing the accuracy of the AR-MPR rifle. Since this post, I have had a few range visits (sorry, don’t have photos as the range does not permit photography) where I did not see the kind of accuracy and consistency that […]
If you are like me, you grow tired of forums where people spread mis-information, and can’t control their attitudes/tempers. Amidst all the nonsense, you may have found some forums online where there are a group of cool guys that like to hang out, talk guns, and help each-other out. It’s nice to have a mix […]
Hey everyone- just wanted to thank you all for the support on YouTube and on this website! Back in September I posted that Ultimate Reloader had hit the 500,000 views mark on YouTube (gavintoobe). Since then, Ultimate Reloader has racked up over 500,000 additional views- doubling our total view count. Thanks very much for your […]
When it comes to guy time – it’s hard to beat putting a rifle together from scratch! Recently, my good friend and neighbor Dale Miller and I started to put together an AR-15 (his first AR-15) for him from individual parts. I already had the tools and supplies from the AR-MPR build, so putting together […]
I would love to find out more about what equipment people are using for metallic cartridge reloading. Please pick the press that you use most frequently. If your most used press is not listed here, please leave a comment! Thanks, Gavin
For a while I have been wondering about the RCBS Rifle Bullet Feeder – and now that I’ve setup and used the 22 caliber kit on the RCBS Pro-2000, I know a lot more about how this tool works, and what it is capable of. Setting up the unit is fairly straightforward, with a requirement […]
Continuing with our coverage of high-volume loading of .223 Remington and 5.56 NATO ammunition for the AR-MPR project, this time we’ll look at using the Hornady Lock-N-Load AP to load for the AR-15. In this video, I’ll show loading in full progressive mode with the use of the Hornady Lock-N-Load Case Feeder system as well. […]
If you have an AR-15, you know that they tend to chew through ammo very quickly. It’s a lot of fun, but it also gets expensive really quickly, especially if you are requiring match-grade ammunition. The solution is to load .223/5.56 on a progressive reloading press. If you really want to crank it up, you […]
Recently, I gave a quick overview of the RCBS Rifle Bullet Feed System. In that post, I gave an overview of what’s included in the kit. In this post, we’ll take a look at what this system looks like installed on a 5-Station reloading press (The RCBS Pro-2000 in this case). As you can see […]
As an avid watcher of shows like “American Pickers” and “Pawn Stars” – I’m aware of the fact that antique values and prices frequently have nothing to do with how “cool” something is or the quality of the item, but rather the rarity of the item. Some antiques are expensive and poor quality, and some […]
Phase III of the AR-MPR AR-15 rifle project is really all about “precision mass production” of the ammunition that we’re developing in Phase II (precision single stage loading). There are a couple key things that we’ll explore: first, we’ll look at progressive reloading of .223 / 5.56 ammunition. We’ll also extend our production rates by […]
