Do you own a MEC Marksman or Forster Co-Ax reloading press? Are you looking for the perfect lighting solution? KMS Squared has just launched two new UFO lights, custom made for these two reloading presses! Let’s see how they work, and how they are installed on these presses.

What’s In the Box

The UFO M² light kit for the MEC Marksman pictured above comes with the following:

1. Instruction card
2. Light strip
3. Abrasive pad (surface prep)
4. Zip ties and adhesive anchors
5. Inline toggle switch
6. Power adapter

The UFO CX light kit for the Forster Co-Ax pictured above comes with the following:

1. Instruction card
2. Light strip
3. Abrasive pad (surface prep)
4. Adhesive strip
5. Inline toggle switch
6. Power adapter

Install

Just like the other UFO press lights, the install process for these lights is EASY:

1. Unpackage light kit
2. Degrease press frame where adhesive will contact (see video) with denatured alcohol, acetone, or similar
3. Heat press frame to about 120 degrees with a hair dryer (where light strip will adhere)
4. Test fit light strip
5. Remove adhesive backing and adhere light strip to press frame
6. Install adhesive strip or zip ties to route cord and hold in place (see video)
7. Install inline toggle switch
8. Plug wall adapter into outlet, then connect to power jack on toggle switch

Get Them Here

You can get these new press lights HERE:

and:

Please stay tuned, there are some KMS Squared Black Friday deals coming your way! Make sure you’re subscribed!

Thanks,
Gavin