Mark 7’s new X-Prime vibratory primer feeder takes capabilities from Mark 7’s commercial models and brings it to the prosumer segment. Designed for the Apex 10, the X-Prime introduces a new level of loading performance, along with some limited time deals!
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
About the Mark 7 X Prime for Apex 10
From Mark 7 Reloading:
-
- High Capacity – Add up to 300 small pistol or rifle primers at a time
- Heavy Duty Construction – Made from CNC machined aluminum and steel
- Easy installation – Mounts directly to a Manual or Automated Apex 10 and integrates with software on your Autodrive tablet
- Works with both small and large primers
-
- Fully Adjustable Vibration – Set precise level of vibration needed for specific brands of primers
- Electronically controlled to stop motor when primer ramp is full
- Backed by the unrivaled Mark 7 customer service and support
The X-Prime represents the new standard in vibratory primer feeding. Made from the same CNC machined aluminum and steel as the press itself, it is built to withstand the pressures of high-volume loading. In addition, the heavy-duty molded funnel cover acts as a blast shield. All the mechanical components are 100% USA manufactured and assembled at Mark 7 in Fort Myers, FL.
X-Prime features integrated controls (no external control box), and mounts quickly and easily to the Gen 2 priming system on either a Manual or an Automated Apex 10. It requires less than 15 minutes for installation, and it integrates seamlessly with the software on your Apex 10 Autodrive tablet.
The X-Prime can hold up to 300 small pistol or rifle primers and uses the same vibratory bowl feed technology found on the Revolution. It can be easily adjusted to varying levels of vibration for small or large primers, as well as different brands of primers, ensuring proper orientation and delivery.
Limited Time Deals!
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Kyle Shields
