New Drop-In Savage Triggers from Bix’n Andy

I have to admit I’ve been spoiled by some amazing triggers. Bullet Central now offers two Bix’n Andy drop-in triggers for Savage rifles, providing an easy way to take a factory rifle to the next level!

Disclaimer

Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.

About Bix’n Andy Savage Triggers from Bullet Central

About a year ago, we partnered with Bullet Central to conduct a number of TriggerScans across their lineup. The TriggerScan TS-11 uses a motorized load cell to create a force versus distance plot across the entire length of the trigger.

This makes it easy to visually compare results between triggers and different pull weights! Be sure to check out the full video and results!

Bix’n Andy’s two newest offerings are drop-in models for the Savage 110. While both use patented ball bearing technology and have a single adjustment screw, they have several defining features.

Bix’n Andy Savage TacSport Pro-X Trigger Internals

The Dakota is a robust hunting trigger with an adjustment range from 1.3 lbs. to 3.5 lbs.

Dakota Trigger

From Bullet Central:

The Dakota trigger for the Savage 110 is part of the Bix’n Andy family engineered for a crisp, predictable break and improved shot-to-shot consistency. It uses the patented ball-trigger design to deliver extremely consistent let-off (within approximately 1 gram), a very fast lock time, and exceptionally low top-sear return force, supporting precise shooting with minimal disturbance to the rifle.

For the Savage 110 platform, the Dakota offers an adjustable pull-weight range of 600-1,600 g (â 1.3-3.5 lb). Pull weight is set via a single external adjustment screw, with no spring changes required, allowing straightforward tuning while maintaining safe sear engagement.

The TacSport Pro-X is a more refined tactical/competition trigger that accommodates a lighter pull weight (0.55 lbs. to 2.2 lbs.).

TacSport Pro-X Trigger

From Bullet Central:

The TacSport Pro-X trigger for the Savage 110 shares the same high-precision Bix’n Andy architecture, providing a clean, light release with consistent let-off (â1 g), very fast lock time, and the lowest top-sear return force in its class. This design supports excellent shot control and repeatability on the Savage 110 action.

For this model, the pull-weight is adjustable from 250-1,000 g (â 0.55-2.2 lb) using a single adjustment screw-again with no spring changes needed-making it suitable for lighter, match-oriented settings while preserving robust safety checks as outlined in the manual.

In addition, the manual specifies that TacSport triggers are built with enhanced environmental protection compared with typical units (including Bix’n Andy’s own Competition line), while noting they are not fully sealed and must still be kept free of contaminants for optimal reliability.

Baseline and Installation

To gather baseline data, I documented my Savage 116 factory trigger using the TS-11.

I conducted this test multiple times, achieving a 3.25-lb. minimum pull weight. Though the factory trigger was extremely consistent, the minimum pull weight far exceeded my preferences, even for hunting.

While I may be an outlier, I like my triggers to be at or below one-lb. pull weight for all applications. Next, I swapped the factory AccuTrigger for the Bix’n Andy Dakota trigger. This was a very simple process. First I removed the pin holding the trigger assembly to the rifle.

This includes the bolt release. As I removed the trigger assembly and safety bar, I paid special attention not to lose the torsion spring. The Dakota trigger assembly drops in, keeping the original safety button and torsion spring. Pushing down on the bolt release lever allowed me to reinsert the pin I had previously removed. I used the ball end of a 1.5mm Allen key (at an angle) to adjust the pull weight.

It was a bit trickier to adjust the TacSport Pro-X installed in a Savage 110 as the trigger’s design doesn’t provide enough clearance for in-stock adjustment. I had to remove the barreled action to adjust the trigger.

Bix’n Andy Savage TacSport Pro-X Installed in Savage 110

TriggerScan Results

I conducted several TriggerScans of each trigger at varying pull weights: near minimum, mid-range, and maximum.

Starting with the Dakota, the near minimum weight was 1.6 lbs., mid-range was 2.2 lbs., and max weight was 3.7 lbs. The graph illustrates the consistency of the various trigger pull weights.

I conducted the same process with the TacSport Pro-X, cranking the screw all the way in, then all the way out, counting the number of turns to estimate the middle.

Bix’ n Andy Savage TacSport Pro-X Pull Weight Adjustment

I ran scans at a close to minimum, mid-range, and near-maximum trigger pull. These values were 0.8 lbs. (low, not minimum), 1.5 lbs., and 2.7 lbs. This adjustment range is ideal for long range shooting and precision work, so I utilized it for most of my shooting.

Bix’n Andy TacSport Pro-X Savage TriggerScan

Shooting

I took the suppressed Savage 110, complete with TacSport Pro-X and chambered in 6.5 Creedmoor, and mounted an Athlon Helos BTR Gen 2 6-24×56 scope. This Savage rifle had Weaver style mounting sections, so I was grateful to find some Athlon rings compatible with both Weaver and Picatinny. I also added a Lone Star level to help me ensure I kept the rifle straight.

I started by bore-sighting at 100 yards, using a bipod and rear bag, and was on paper with my second shot. I took this time to also gather velocity data with my Athlon RangeCraft Velocity PRO Radar Chronograph. This is critical for calculating appropriate DOPE for various yardages. Recent rain eliminating fire danger meant the first time shooting far steel on the Ridgeline in months.

My first marks were D-M steel rockchucks at 335 yards. My DOPE was right on – I had no problems hitting the life-size targets with Berger 6.5 Creedmoor ammunition.

Next, I moved to an IPSC target at 660 yards. Upon missing my first shot, I referenced my bubble level — I was canted off to the side. This means that some of my elevation adjustment was going to windage, not giving me the full value of what I had dialed. I took extra care in keeping the rifle level with my next shots, successfully impacting the steel six consecutive times while aiming dead center!

I finished my shooting prone at 706 yards, continuing to make six consecutive, solid hits. It’s amazing how easy it is to get on target using quality data and modern equipment like Athlon’s RangeCraft Velocity PRO Radar Chronograph. Keep in mind this was all done with a budget rifle after the addition of a TacSport Pro-X with a very clean, predictable break!

Conclusion

Upgrading a trigger is perhaps one of the most powerful changes you can make to a rifle. The Bix’n Andy Dakota and TacSport Pro-X offer two different ranges of trigger pull weights, but both can cut the factory trigger weight at least approximately in half. They also both broke very cleanly and were easily predictable.

Bix’n Andy Savage Dakota Installed in the Savage 116 Rifle

Having a trigger you can rely on and are comfortable with increases your ability to shoot well and take ethical shots, particularly if you are used to the feel of a match trigger. If you are looking to upgrade your Savage, definitely consider a Bix’n Andy trigger!