Tag: DPMS

Page 2 of 3
1 2 3

AR-308 – Millett TRS-1 Scope Install

Following up on the last post covering the Millett Tactical TRS-1 scope, in this video I’ll cover the mounting procedure for this scope using a pair of Millett tactical scope rings (medium height). I’ll also demonstrate the use of the Wheeler Engineering Firearms Accurizing Torque (FAT) wrench. This is a simple scope mounting procedure where […]

AR-308 – Millett TRS-1 Scope Specifications and Details

In my last post, we took  a look at the features and overall fit/finish for the Millett TRS-1 tactical scope. In this post, we’ll get into more details and look at the specs for this scope. When you purchase the Millett TRS-1 scope, you get the following: Scope Dust caps (for objective and eyepiece) – […]

AR-308 – Millett TRS-1 4-16x50mm Scope Overview

One of the most important components of a good long range rifle is the scope. It goes without saying that a scope must hold zero in order for a rifle to shoot tight groups. The quality of the optics, the repeatability and accuracy of the windage/elevation adjustments, and other factors also play a key role […]

AR-308 – Geissele SD-C Trigger Upgrade

A while back, I posted the Geissele trigger install video while building the AR-MPR AR-15 rifle. I liked the Geissele trigger used on the AR-MPR project so much, that I decided to buy one for the AR-308 project – this time a different version. In this video, we’ll remove the factory trigger, and replace it […]

AR-308 – Project Phases and Details

Now that I’ve formally kicked-off the AR-308 project, I wanted to take a moment to give a high level overview of what I’ll cover over the course of this project. The goal is to learn about the .308 Winchester / 7.62x51mm cartridge family, take a close look at the DPMS LR-308 rifle platform, and also […]

AR-308 – Loading the LR-308b – Project Kickoff

I’m excited to announce a new project we’ll be working through here on http://ultimatereloader.com that will extend some of what we did with AR-MPR, but this time we’ll focus on the “big brother” to the AR-15- the AR-10 platform, specifically the DPMS LR-308B. For optics, we’ll get an up-close look at the Bushnell/Millett TRS-1 tactical […]

AR-MPR: Build Part 7 – Lower – Buttstock and Mating Upper Lower

In this, the final AR-15 assembly video, we’ll walk through the installation of the takedown pin and the buttstock assembly. Finally, we’ll put the upper and lower together for the first time and establish basic functionality (formal function check to follow in subsequent posts). After all of the planning and work that went into getting […]

Page 2 of 3
1 2 3



Reloading Safety

Polls