We’ve got new Cerakote ovens at Ultimate Reloader! You’ve seen our small Cerakote shop. This time we’re expanding Precision Rifle Concepts into a full Cerakote shop with new Built American ovens! And if you use the UR5 discount code, you can save 5% site-wide at Built American!
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
About the Built American BAE-100
We’re helping Built American launch their new Cerakote ovens.
The desktop-sized BAE is an affordable option for small-batch Cerakote.
From Built American:
BAE-100 Standup Capacity Cerakote Convection Oven was engineered specifically for Cerakote™ applicators. It is built for curing Cerakote ™ ceramic coatings. The convection assist airflow design teamed with the high temperature motor provides temperature uniformity to ensure consistent drying, curing and baking results.
– Corrosion-resistant stainless steel curing chamber
– Durable exterior finish
– Low overall energy consumption
– Operating temperatures from 000° to 550°F
– One year limited warranty
Electrical Specifications: 208-240VAC; 20A
Chamber Volume: 14.48 cu.ft.
Weight: 450 lbs.
Interior Dimensions: 32” Width x 29.5” Deep x 26.5” Height
Exterior Dimensions: 37” Width x 35” Deep x 43.5” Height
About the Built American BAE-200
We have two BAE-200 ovens at Precision Rifle Concepts.
These units have an attractive black finish, low energy consumption, a user-friendly, microprocessor-controlled interface, convection assist airflow, and a max temperature of 550℉.
The touchscreen control also connects to a phone app for remote monitoring capabilities.
They also have a high-quality cord, two shelf fixture system, high temperature ceramic fiberglass door seal, dual heating elements with covers and castor wheels.
From Built American:
BAE-0200 Standup Capacity Cerakote Convection Oven was engineered specifically for Cerakote™ applicators. It is built for curing Cerakote ™ ceramic coatings. The convection assist airflow design teamed with the high temperature motor provides temperature uniformity to ensure consistent drying, curing and baking results.
– Corrosion-resistant stainless steel curing chamber
– Durable exterior finish
– Low overall energy consumption
– Operating temperatures from 000° to 550°F
– User-friendly, microprocessor-controlled interface
– Convection assist airflow high temperature provides temperature uniformity
– Two (2) shelf fixture system
– High temperature ceramic fiberglass door seal
– Dual (2) long-life mineral insulated metal sheathed heating elements
– Heating element cover plate
– one year limited warranty
Electrical Specifications: 208-240VAC; 40A
Mechanical Specifications: Chamber Volume:28.68 cu.ft.
Weight: 700 lbs.
Interior Dimensions: 32” Width x 29.5” Deep x 52.5” Height
Exterior Dimensions: 37” Width x 35” Deep x 64” Height
This oven also has a few available options: a touch screen controller upgrade with WiFi and a stainless steel chamber upgrade.
Our two ovens have both of these upgrades. This oven is also available single phase or three phase. We chose single phase. Each oven has a breaker and on/off switch.
Demo
The first step is to specify a recipe on the touch screen. I set the oven for 15 minutes of what I call “ramp-up” time at 250℉ and over two hours of cure time. With the recipe set, I pressed “run” and started Cerakoting a MDT ACC chassis in a Built American spray booth.
After the ramp up time was complete, I hung the chassis inside and let it cure for just over two hours.
Besides the space, one of the things I’m most excited about with my new ovens is the remote monitoring and control capabilities.
This allows me to shut off the oven from a different location as well as see what’s going on — a handy safety feature if you can’t be by your oven all day! This is done via Wi-Fi network or over the cloud.
Conclusion
These USA-made ovens offer professional quality at an affordable price with added peace of mind and convenient features.
Stay tuned for a tour of the new Cerakote shop at Precision Rifle Concepts and more fun projects!
Get the Gear
Use the code UR5 to save 5% sitewide on BuiltAmericanEquipment.com.
BAE-0100 Desktop Capacity Cerakote Convection Oven
BAE-0200 Standup Capacity Cerakote Convection Oven
If you’re interested in taking the Cerakote Certified Applicator training, I would suggest enrolling ASAP as there’s a bit of a waitlist. If you’ve taken the class, consider the advanced course!
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear
