Cleaning cases is where the ammunition reloading process starts. Cleaning, sorting, and final brass prep are critical activities if you want great results with your ammunition. However fundamental these processes are, they are seldom characterized as the “fun part” of reloading- more like chores to get to the more satisfying activities. Having the right tools […]
One of the great things about reloading ammunition is the wide variety of tools, equipment, components, cartridges, and firearms that you get to work with. Just when you think you’ve tried everything, you learn of a new powder, cartridge (Ex: 22 Nosler, sounds interesting!), press, rifle, or bullet. That’s what makes shooting and reloading a […]
If you demand precision from your rifle, you need precision from your ammunition. If you need precision from your ammunition, you’ll need the proper precision measurement tools to “dial things in”. A good ball micrometer is an example of one of a handful of precision measurement tools you should have in your tool chest in […]
In my last post, I gave an overview of some of the case lube products that I’ve used personally. These are the spray-on and wipe-on products that a lot of reloaders use on a regular basis. But there’s one more product that I use that’s interesting for those that want to load bulk quantities of […]
There’s one more powder check system that we’re going to look at on our reloading safety series- the “RCBS Powder Checker Die”. This unit is very simple, easy to setup, and works well. It’s comparable to the “Hornady Powder Cop Die”. This system is quite versatile, and intuitive to setup and use. Let’s take a […]
In the first RCBS Lock-Out Die article, I discussed how the RCBS Lock-Out Die works. In this article, we’ll take a look at how to setup the die, and also how to disassemble and reassemble the die for cleaning and maintenance. There are multiple ways to skin a cat, and likewise, there are multiple ways […]
Most reloaders have heard of the RCBS Lock-Out Die. This device will allow the reloading press to cycle normally when there is a proper powder charge, but will “lock up” the press if there is too much powder in the charge, or not enough powder in the charge (including no powder – a “squib load”). […]
