In this video you'll see how the RCBS pistol bullet feeder can be used with the Lee Loadmaster progressive reloading press. In this video, you'll see plated 200 grain 45ACP bullets used in this feeder.
RCBS Bullet feeder on Lee Loadmaster for 45 ACP (HD)
In this video you'll see how the RCBS pistol bullet feeder can be used with the Lee Loadmaster progressive reloading press. In this video, you'll see plated 200 grain 45ACP bullets used in this feeder.
Nice setup. I’ve just gotten into reloading. I’ve decided on the Lee Pro 1000 press to start. I think I will eventually move to the Loadmaster as my primary and use the Pro 1000 for my secondary shell reloading. Thank you for your videos. They’ve greatly helped in getting started with reloading. I’m curious as to what you think about the Lee powder measure and whether the RCBS or Dillon powder measure would be a better choice?.
Regards,
Mark
SouthpawPatriot- If you get the Pro 1000 or the Loadmaster, you’ll be using the Lee Auto-Disk which works great in my experience. Each powder measure system has its pros/cons
I’ve been shooting for a long time and I have toyed with the idea of relaoding. As in your article, I was a little intimidated by the equipment. But. After finding this web site, and actually seeing the loading process. I am less intimidated. Thank You for your information and help.
EJ
can you load cast bullets with this bullet feeder?…
i know that rcbs says that the machine wasen’t designed for them, but i’m curious if you’ve done it, or would try it.
Cast bullets will cause the bullet feed die and feed tube (spring) to gum up with lube. So, that’s not a good idea with this unit. You can however use plated bullets.
thanks for the speedy reply gavin, ok so cast bullets don’t work through the rcbs, but have you ever used the lee bullet feeder that they make for the loadmaster? if so how well did it work?…
thanks,
jesse