Subsonic shooting and reloading can be incredibly rewarding. Whether you’re getting started with subsonic ammunition or looking to optimize an existing load, there are some important factors to understand before heading to the range.
In this video, I’m walking through how to find subsonic load data, navigate Hodgdon’s Reloading Data Center, and verify your results with a chronograph. I’ll also cover some of the specialty subsonic applications that have caught my attention, from .300 Blackout to .223 Remington and 7.62×39. My goal is to help you understand how to approach subsonic reloading systematically, use published data responsibly, and evaluate the performance of your ammunition in your particular firearm.
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
Understanding the Science of Subsonic Ammunition
Before we get into load data, I want to revisit a few important concepts from my previous video on the science of subsonic ammunition and shooting.
The speed of sound is often approximated at 1,100 feet per second, but it isn’t a fixed number. Temperature is a major factor. Across an extreme temperature range of -20°F to 120°F, the speed of sound can vary from approximately 1,028 to 1,181 feet per second.
That’s a difference of more than 150 feet per second!
When a projectile travels faster than the speed of sound, it produces a supersonic crack. Keeping a projectile below that threshold eliminates the ballistic crack, although the firearm’s action and muzzle report can still produce noise.
This is where a suppressor and subsonic ammunition work together. The suppressor reduces the muzzle report, while subsonic velocity eliminates the sonic crack.
I especially enjoy shooting my suppressed Ruger 10/22 with subsonic ammunition. It’s a remarkably quiet experience, and I can hear the bolt cycling and the sound of the bullet striking the target.
Keep in mind that perceived quietness isn’t a reliable measure of hearing safety. Always evaluate the need for appropriate hearing protection based on the firearm, ammunition, suppressor, and shooting environment.
Why Velocity Consistency Matters
When I’m loading subsonic rifle ammunition, I want to get useful performance while maintaining a sufficient margin below the speed of sound.
That means I need to consider more than just average velocity.
Let’s say a load averages 1,050 feet per second and has an extreme spread of 40 feet per second. That spread represents a 20-foot-per-second difference above and below the average if the results are distributed around it in that way. A faster outlier could put a shot above the speed of sound, depending on the conditions.
This is one reason Hodgdon’s published subsonic data and velocity targets are useful starting points. The goal isn’t necessarily to hit one exact velocity. Consistency and an adequate safety margin matter, too.
Temperature adds another layer of complexity. It can affect both the speed of sound and the performance of the propellant, so a load that behaves one way under one set of conditions may behave differently under another.
Finding Subsonic Loads in Hodgdon’s Reloading Data Center
One of the resources I recommend exploring is Hodgdon’s Reloading Data Center. It provides published data for rifle, pistol, shotgun, and muzzleloader applications.
For rifle cartridges, Hodgdon separates data into three categories:
Standard: Conventional loads for the selected cartridge and components.
Subsonic: Published data intended for subsonic applications.
Reduced recoil: Loads designed to reduce recoil compared with conventional ammunition.
There can be some overlap between subsonic and reduced-recoil applications, but they aren’t interchangeable categories. Always select data that specifically matches your intended application.
Reduced-recoil data is particularly interesting because it can make a powerful cartridge more approachable. For example, appropriately published reduced-recoil loads can offer a useful way to introduce a new shooter to a rifle without starting with full-power ammunition.
For subsonic rifle applications, however, I want to use data specifically developed for that purpose rather than simply reducing a conventional load.
Subsonic Pistol Loads: A Straightforward Starting Point
Pistol cartridges are often the easiest place to begin exploring subsonic ammunition.
Many common handgun loads already operate below the speed of sound, particularly when using heavier bullets. Two examples are 9mm Luger with a 147-grain bullet and .45 ACP with a 230-grain bullet.
That doesn’t mean every load in those cartridges is automatically subsonic. Bullet selection, barrel length, and other variables can affect velocity.
9mm Luger with 147-Grain Bullets
When I look at 9mm data, I like to start by examining common heavier bullet weights.
In the video, I use Hodgdon’s data for a 147-grain 9mm bullet with CFE Pistol as an example. The published velocities shown in the data are comfortably below the commonly referenced speed-of-sound threshold under the test conditions.
For many shooters, this illustrates how straightforward subsonic pistol ammunition can be when using appropriate published load data.
.45 ACP with 230-Grain Bullets
The .45 ACP is another natural candidate for subsonic shooting. A 230-grain bullet is a classic choice for this cartridge.
I also look at Hodgdon’s CFE Pistol data for different 230-grain bullet designs. The examples in the video illustrate that published velocities can be similar even when the bullet designs differ.
The important point is to select the exact bullet and load combination covered by the data, rather than assuming that similar bullet weights will produce identical results.
Don’t Forget Barrel Length
One detail worth emphasizing is barrel length.
A load tested in a conventional handgun barrel may produce a different velocity when fired through a much longer barrel, such as one found on a pistol-caliber carbine.
If I’m planning to shoot subsonic ammunition through a different firearm configuration, I want to verify the actual velocity rather than assume the original data will transfer perfectly.
I recommend using a quality chronograph to measure results. At Ultimate Reloader, we use the Athlon Rangecraft Doppler chronograph, and it has been a useful tool for evaluating ammunition performance.
.300 Blackout: Designed for Supersonic and Subsonic Shooting
The .300 Blackout is one of the most interesting cartridges for subsonic applications because it was designed to accommodate both subsonic and supersonic ammunition.
It’s a versatile cartridge, and pairing subsonic ammunition with a suppressor makes for an enjoyable shooting experience.
In the video, I look at Hodgdon’s subsonic data for 220-grain Berry’s bullets and CFE BLK.
One thing I find interesting about this section of the Reloading Data Center is how the subsonic data is presented. Rather than displaying the familiar starting-load and maximum-load format used in many conventional rifle listings, the selected subsonic entries provide specific published load information for the intended application.
The data also illustrates that the resulting velocity may not land on one exact target number. Published examples can fall slightly above or below a nominal 1,050-feet-per-second goal.
That doesn’t mean I should adjust a load based on a single velocity figure. Instead, I need to consider the test conditions, firearm configuration, velocity variation, and the specific published components and instructions.
Barrel length matters here. Hodgdon’s test setup may differ from my own. A shorter barrel and a longer barrel can produce different velocities, so I need to evaluate the data in the context of the firearm I’m actually using.
The takeaway is simple: .300 Blackout offers excellent subsonic potential, but I still need to verify performance in my own firearm.
Specialty Subsonic Loads: Beyond .300 Blackout
This is where the subject gets especially interesting to me.
At Ultimate Reloader, we’ve explored specialty subsonic applications beyond cartridges commonly associated with suppressed shooting. One example is a subsonic .30-30 Winchester load using a 150-grain Berry’s projectile designed for lever-action applications.
Now Hodgdon has expanded the specialty subsonic options available through its Reloading Data Center, opening up some additional possibilities.
Subsonic .223 Remington
I was particularly intrigued to see subsonic .223 Remington data available.
We have several .223 Remington firearms at Ultimate Reloader, including both bolt-action and semiautomatic platforms, and the possibility of exploring subsonic performance with those firearms is appealing.
In the video, I examine the published data for a 77-grain bullet and Titegroup powder.
Titegroup is especially interesting because of its consistent burning characteristics and relative insensitivity to powder position. In a cartridge with substantial unused internal volume, powder position can influence ignition and performance. A propellant’s behavior in that environment is an important consideration.
However, I don’t want to treat a powder’s reputation for position insensitivity as a guarantee of safety or consistency in every cartridge. Reduced-load and specialty subsonic applications require data developed and published for the specific combination.
This is one reason I appreciate Hodgdon’s work in this area. Developing suitable specialty loads requires more than taking a conventional supersonic load and reducing the powder charge.
Why Specialty Load Data Is Valuable
One of the major risks when experimenting with reduced rifle loads is erratic performance, including the possibility of a projectile failing to exit the barrel.
A bullet lodged in the bore is a serious problem, and firing another round before resolving the obstruction can be extremely dangerous.
That is why I don’t recommend improvising subsonic loads by simply reducing charges from conventional supersonic recipes. A powder that works well at conventional pressures and velocities may not behave appropriately in a significantly reduced-load application.
Published specialty data helps provide a tested starting point for the specific cartridge, bullet, and powder combination.
If Hodgdon doesn’t provide data for the combination I’m considering, I won’t assume that another cartridge’s data or a similar-looking load can be substituted.
Subsonic 7.62x39mm
Another example I explore is 7.62x39mm using 220-grain bullets.
We have experience shooting subsonic ammunition in AK-pattern rifles, and I’ve been impressed by how reliably our particular rifle handles the ammunition we’ve tested.
In the video, I examine Hodgdon’s published subsonic data, including CFE BLK.
This is a useful reminder that subsonic ammunition can be particularly interesting in semiautomatic firearms, but reliability depends on the entire system. The operating mechanism, ammunition, magazine, and suppressor can all influence how the firearm functions.
A load that cycles reliably in one AK-pattern rifle doesn’t necessarily mean it will function identically in every other rifle.
Verifying Subsonic Loads with a Chronograph
Once I’ve identified appropriate published load data, the next step is verification.
At Ultimate Reloader, we’re fortunate to have our loading equipment and range close together. I realize not everyone has that convenience, but I recommend bringing your test ammunition to the range and measuring its performance before committing to larger quantities.
Here are the measurements I pay particular attention to:
Average velocity: The average speed of the shots measured.
Extreme spread (ES): The difference between the highest and lowest recorded velocities.
Standard deviation (SD): A statistical measure of how much the velocities vary.
Maximum recorded velocity: Particularly important when evaluating how close the fastest shot comes to the speed-of-sound threshold.
For subsonic applications, I want to know more than whether the average velocity looks appropriate. A low average can conceal an individual shot that travels much faster than the rest.
I also want to compare my results with the published data while remembering that barrel length, firearm configuration, components, and environmental conditions can affect the outcome.
Evaluate the Conditions You’ll Actually Shoot In
Temperature is another important consideration.
If I plan to shoot in substantially different temperatures, I need to understand how those conditions may affect both the ammunition and the speed of sound.
Cold weather lowers the speed-of-sound threshold, while warmer weather raises it. Propellant temperature sensitivity can also influence ammunition velocity and consistency.
That means I shouldn’t assume that a load verified under one set of conditions will behave identically in every environment.
I want to evaluate the ammunition under the conditions in which I expect to use it and maintain an appropriate margin below the speed of sound.
Semi-Automatic Firearms: Reliability Is Part of the Equation
Velocity is only one part of a successful subsonic setup. With a semiautomatic firearm, I also need to evaluate reliable operation.
Different operating systems—including direct-impingement, piston-driven, blowback, and recoil-operated designs—respond differently to ammunition and suppressor configurations.
Magazine compatibility can matter, too. For example, .300 Blackout ammunition with long, heavy bullets may have different geometry from conventional 5.56 NATO ammunition. Magazines specifically designed for .300 Blackout can help address cartridge-specific feeding considerations.
The firearm, ammunition, suppressor, and magazine need to work together as a system.
If I’m troubleshooting a subsonic semiautomatic setup, I want to approach it methodically and use manufacturer guidance rather than making multiple unverified changes at once.
Conclusion
After exploring Hodgdon’s subsonic load data, I’ve come away with several important points.
First, start with the right data. Hodgdon’s Reloading Data Center is a valuable resource for finding published subsonic and reduced-recoil loads. I want to use data that matches the cartridge, bullet, and powder I’m working with.
Second, don’t assume that all subsonic cartridges are equally complicated. Common handgun cartridges such as 9mm with 147-grain bullets and .45 ACP with 230-grain bullets are often relatively straightforward. Specialty rifle loads require considerably more attention.
Third, use a chronograph. Average velocity is useful, but I also want to examine ES, SD, and the maximum recorded velocity. Those measurements help me understand consistency and identify shots that approach or exceed the speed-of-sound threshold.
Fourth, account for the firearm and the environment. Barrel length, semiautomatic operating systems, suppressors, magazines, and temperature can all influence the results.
Finally, don’t improvise reduced loads. Subsonic reloading is a lot of fun, but it requires the right data and careful verification. Specialty published load data is particularly valuable because reducing a conventional load can produce unpredictable results.
We’ve had a great time exploring subsonic ammunition at Ultimate Reloader, and I’m looking forward to testing more cartridges and sharing what we learn.
Get the Gear
Search the subsonic section of Hodgdon’s Reloading Data Center.
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear


































































