We are back with another Armanov video! This time, we are taking a look at the all-new Gen 2 Bullet Feeder from Armanov. For this test, we are setting it up to load 9mm on a Frankford Arsenal X-10 progressive press that is already tricked out with a bunch of other great Armanov upgrades. Armanov has introduced some exciting updates with the Gen 2. Let’s see what it takes to get it running!
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Articles on this website are derived from original video content and may utilize artificial intelligence (AI) tools for initial drafting, transcript processing, and editorial refinement; no AI technology independently generates or verifies technical instructions or safety data. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
What’s New with Gen 2?

Armanov’s Gen 2 bullet feeder introduces several major features and upgrades compared to the Gen 1 model.
Here is a quick summary:
- Dual Optical Sensor: Built directly into the dropper tube assembly, it visually indicates whether the unit is full and ready, filling (motor running), or experiencing an issue that needs attention.
- Injection Molded Body: The front hopper enclosure is now injection molded rather than 3D-printed.
- See-Through Enclosure: The clear front hopper allows you to easily monitor the level of bullets inside.
- Built-in Auto-Reverse: The motor automatically attempts to clear jams. If that fails, there is a convenient lever to disengage the motor from the drive ring so you can manually unjam the feeder.
- Magnetic Storage: An included Allen key for adjusting the bullet shelf stores handily on the back via a magnet. The 3D-printed outer ring also snaps neatly into place using magnets.
Like everything from Armanov—including their case gauges and racks—the Gen 2 feeder exhibits highly intelligent design and exceptional execution.
Differences for the X-10
While Armanov makes kits for Dillon presses (like the XL650 and XL750), our test model is specifically designed for the Frankford Arsenal X-10. This creates a few differences in the kit.
Firstly, the X-10 kit includes a dedicated mount. Rather than hanging directly off of a Dillon case feed bowl, this mount utilizes a single screw with a T-nut that rotates into place to grab directly onto the X-10’s accessory pole.

Secondly, the X-10 kit includes a dedicated flare die.

In a Dillon kit, you would receive a powder-through funnel that takes the place of the Dillon funnel inside the powder measure. The X-10 requires a separate flare die to provide an optimized flare so that as the casing indexes and jostles, the bullet is held firmly in place until it can be seated.
Assembly and Setup
Setup is super straightforward.

If you need step-by-step visual guidance, Armanov includes a QR code on the box that links directly to a highly-detailed video walkthrough by Urban on their product page.

I began by installing the flare die. Starting with about a 1/4-inch gap between the bottom of the die and the shell plate, I adjusted it down until I achieved the appropriate flare.

Next, I set up the bullet feed die. Moving the lock nut and spring catch upward on the die body, I screwed the die into the toolhead and loaded it with four bullets. Placing a properly flared 9mm case into the shell plate, I raised the press to the top of its stroke and continued to screw the die down until I heard the bullets drop. After adding an additional quarter to half turn, I locked down the main nut.

Finally, I mounted the hopper assembly to the X-10 pole, connected the dropper tube springs to the die’s lock ring, and secured the twist-lock connector.

After plugging the dual optical sensor harness and main power supply into the unit, we were ready to go. The sensor glowed blue to indicate the motor was running and filling, switching to green when full.

Adjusting the Flipper Shelf
Before loading in bulk, you must adjust the bullet flipper shelf inside the hopper. The basic idea is to find the perfect middle ground: if the shelf is pushed too far in, all the bullets will fall back into the bowl; if the shelf is pulled too far out, you might get upside-down bullets dropping down the tube.

I grabbed the included Allen key. Tightening the screw pulls the shelf outward, while loosening it pushes the shelf inward. Fortunately, our unit appeared perfectly adjusted right out of the box!
Loading 9mm
To prepare for this session, I removed the handy Armanov case feed shut-off plug (which stores conveniently via a magnet on the press) to allow cases to flow.

During the initial run, I had one case fail to drop a bullet due to a slight case length variation. This was an easy fix—I simply cranked the bullet dropper die down just a tiny bit more. Once dialed in, the press ran flawlessly.

This is the ultimate loading scenario. I get a completed round with every single pull of the handle while keeping one hand completely free. It is exactly the way you want to load bulk 9mm ammunition.
Conclusion
The Gen 2 bullet feeder from Armanov is priced affordably, super well-engineered, and functions exceptionally well. If you have an X-10 or a Dillon progressive press, I highly recommend checking this unit out.

Get the Gear

Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear


































































