If you want fast and efficient on-press brass trimming but don’t want the heavy price tag of a full automated trimming system, Armanov has you covered. In this article, we’re going to take a look at Armanov’s router case trim kit, see what is included, and put it to the test on both .223 Remington and .308 Winchester!
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Articles on this website are derived from original video content and may utilize artificial intelligence (AI) tools for initial drafting, transcript processing, and editorial refinement; no AI technology independently generates or verifies technical instructions or safety data. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
What’s in the Box (and What You Need)
Armanov packages their router case trim kit in a convenient tube. Here is what comes in the box:
- Router body adapter (designed to fit trim routers with a standard 64.8mm body diameter, such as the Makita RT0701C)
- 8mm shank endmill cutter
- Vacuum adapter hose attachment (which easily swings around the head of the unit to cleanly suck away brass chips)
- An Allen key for adjusting the clamp on the body adapter
To complete the setup, you will also need:
- A small trim router with a 64.8mm body diameter (like the Makita RT0701C)
- An 8mm collet for your router to accommodate the endmill cutter shank
- A sizing and trim die (such as those made by Dillon Precision or Lyman in .223, .308, etc., which sizes the brass to prevent it from spinning while the trimmer cuts the case mouth)
- A shop vacuum
Testing on .223 Range Pickup Brass
For our first test, we mounted a Dillon .223 sizing and trim die in our press and paired it with a bunch of range-pickup .223 brass that had already been trimmed once. We wanted to see how consistent the system could be on mixed, dinged-up range brass.
After installing the 8mm endmill cutter into the Makita router collet, sliding the Armanov router body adapter over the router, and securing the vacuum hose attachment, we adjusted the trim die. The trim die sizes the case body to hold the brass firmly in place while the endmill cutter meets the mouth of the case.
We turned on the shop vacuum and the router, and fed the brass through. The unit worked great, producing a mirror-smooth finish on the mouth of the cases (though you will still need to perform an inside and outside chamfer, which is true of all flat-cutter automated trimmers). Measuring our trimmed .223 range brass with a caliper, we found the lengths to be exceptionally consistent, hovering within a tiny fraction of a thousandth of an inch of variance.
Testing on Brand New .308 Brass
To push the system toward maximum potential consistency, we tore down the setup and rebuilt it around a Dillon .308 trim die using brand-new Peterson .308 brass.
When setting up an on-press trimmer, there are three primary variables that affect your overall trim length:
- Cutter Depth: How deep the endmill cutter is seated in the router collet.
- Die Height: The height of the size/trim die in the press (determining how much neck protrudes into the cutting window).
- Router Housing Height: Adjusting the height of the router body adapter by rotating it on the die threads and locking it down with the lock nut.
After establishing a baseline zero with a fresh case, we adjusted the cutter to take off roughly 9 thousandths of an inch. We trimmed a batch of 10 brand-new Peterson cases under the vacuum and router.
When we measured the resulting batch, the extreme spread across the 10 cases was a mere 2 thousandths of an inch! That level of precision is going to satisfy every reloading scenario short of the most demanding, over-the-top benchrest shooters.
Conclusion
The Armanov router case trim kit is a cost-effective, incredibly well-designed solution for anyone looking to add fast, on-press trimming to their bench without paying for a heavy, dedicated trimming machine. It produces a clean, smooth cut, integrates seamlessly with a shop vacuum to keep your workspace free of brass chips, and delivers outstanding length consistency whether you’re processing mixed range brass or premium new components.
What do you think about the Armanov router case trimmer setup? Would you run this on a progressive press or a single-stage? Drop a comment below!
Get the Gear
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear


































































