If you are like me, after the public introduction of the 7mm BackCountry, you have been wondering, “Is this thing going to live up to the hype, and what is this cartridge all about?” In this video, we are going to get into exactly that. In this first part of our series, we are providing an overview of the cartridge and putting it to the test in Geissele’s King Hunter rifle.
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
What is the 7mm BackCountry?
Introduced to the industry at the 2025 SHOT Show, the 7mm BackCountry is a fully SAAMI-certified cartridge that makes some incredibly bold claims. The fundamental equation is this: pushing a 175-grain projectile at approximately 2,900 feet per second out of a short 20-inch barrel.
How is this possible from a non-magnum, .308 bolt-face cartridge that essentially looks like a .30-06 necked down to 7mm? The secret lies in extreme pressure. While most cartridges are limited to around 65,000 PSI per SAAMI specs, the 7mm BackCountry operates at 80,000+ PSI. This immense pressure is contained safely thanks to Federal Premium’s patented “Peak Alloy” technology—a steel alloy case that is significantly stronger than traditional brass.
The result is a short, suppressor-optimized cartridge that matches or exceeds traditional 7mm Remington Magnum velocities out of a much shorter barrel and a standard bolt face.
The Geissele King Hunter Rifle
To test this cartridge, we are using the Geissele King Hunter. This rifle was purpose-built around the 7mm BackCountry.
It features a long action and a 20-inch, 1:8 twist barrel optimized for suppressor use. The barreled action rests in a premium Manners Longrange Hunter stock. The rifle weighs in at about 8 pounds, which I find to be the perfect weight for a powerful cartridge—it provides enough mass to absorb recoil, watch your trace, and spot your hits or misses effectively.
For optics, I installed the Element Titan 5-25×56 scope using the pre-installed Picatinny rail sections on the action.
Trigger Scan: The Super 700
The King Hunter features the Super 700 two-stage trigger, originally developed for the US military sniper rifle system. Out of the box, our TriggerScan TS-11 showed a highly consistent factory pull weight of about 3.6 pounds.
Being a fully adjustable trigger, I backed out the overall trigger pull weight adjustment screw exactly one turn. Scanning it again, the pull weight dropped to a perfectly crisp 1.9 pounds. The break on the second stage is incredibly definitive, making it an ideal trigger for a precision hunting rifle.
Accuracy and Range Testing
Starting at 100 yards, I fired 3-shot groups from a bench rest utilizing factory 175-grain ammunition.
With the factory brake: The group measured just over 0.5 inches.
With the Area 419 Maverick Gen 2 (Stage 1 + Brake): The group shrank to just under 0.5 inches.
With the SilencerCo Omega 300: The group similarly measured just under 0.5 inches.
Producing consecutive sub-half MOA groups with factory ammunition out of a factory rifle—while pushing 2,950 fps from a 20-inch barrel—is an outstanding result.
Moving up to the Ultimate Reloader Ridgeline range, the rifle proved its long-range hunting viability. We easily connected at 335 yards. Stretching out to 706 yards in heavy rain and mud made spotting misses incredibly difficult, but after one calculated wind-hold adjustment, I stacked multiple consecutive hits on the steel.
Putting Numbers to Recoil
One of the major claims of the 7mm BackCountry is highly manageable recoil. We put the Geissele King Hunter on the Ultimate Reloader Recoil Rig (featuring the Dewesoft Sirius DAC capable of 200,000 force readings per second) to find out.
Here are the peak force numbers:
- Bare Muzzle (Baseline): 760.9 lbs
- SilencerCo Omega 300: 348.1 lbs (54.2% reduction)
- Factory Brake: 365.3 lbs (>50% reduction)
- Area 419 Maverick Gen 2 (Stage 1 + Brake): 274.1 lbs (63.93% reduction)
The Maverick Gen 2 setup dropped peak recoil forces down to a highly sustainable 274 pounds. Keep in mind that this configuration is not hearing-safe and requires ear protection, but it makes the rifle incredibly pleasant to shoot while taking the bite out of the blast.
Conclusion
Does the 7mm BackCountry live up to the hype? Absolutely. It delivers 7mm Rem Mag velocities from a shorter barrel with highly manageable recoil, all contained in a top-tier rifle platform. The Geissele King Hunter exudes quality, and the Manners stock paired with the Super 700 trigger makes it a joy to drive. In our next chapter, we will dive into the unique challenges and processes of reloading this 80,000 PSI, steel-cased cartridge using specialized Geissele dies.
Get the Gear
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear


































































