Can you have your cake and eat it too when it comes to Precision Rifle Series (PRS) ammunition? When you need to load hundreds of rounds for a match, spending hours on a single-stage press can be tedious. Deploying a progressive press is a great way to achieve high-volume efficiency and match-grade precision, but it requires a very specific approach to load development and component selection. In this video, we’re going to walk through our complete strategy for developing and loading match-grade PRS ammo on the Dillon RL550 progressive press—focusing on our 6×47 Lapua setup using Berger 120-grain hybrid bullets and Winchester StaBall 6.5 powder.
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Articles on this website are derived from original video content and may utilize artificial intelligence (AI) tools for initial drafting, transcript processing, and editorial refinement; no AI technology independently generates or verifies technical instructions or safety data. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
The Goal & Why the Dillon RL550?
For PRS-style shooting, our performance requirements are very clear and practical:
- Precision: Sub-half MOA group sizes.
- Velocity Consistency: A Standard Deviation (SD) in velocity of roughly 10 fps or better.
While some competitors prefer single-stage presses with custom powder tricklers for absolute control, if we can achieve match-grade results on a progressive press, we can crank out 200 rounds in a fraction of the time.
For this task, the Dillon RL550 is the ideal centerpiece. It features a simple, precise layout with a small-diameter shell plate that minimizes flex. For precision rifle loading, we skip the optional case feeder and manually insert cases and bullets, using the 550 like a semi-manual press that grants easy access to every station.
Load Development: 6×47 Lapua with Berger 120s
Our test platform was a tack-driving custom rifle featuring a Hammerhead action, WOOX Furiosa Ultra stock, and a Leupold Mark 5HD scope, chambered in 6×47 Lapua (a fantastic cartridge that bridges the gap between the 6GT and 6 Creedmoor while feeding smoothly out of standard AICS 308 magazines).
- Initial Testing with Extruded Powder (H4350): We started by running ladder tests with H4350 and Berger’s new 120-grain hybrid 6mm bullets. While initial group sizes were phenomenal (with some three-shot groups punching down near .31 inches), the extruded powder resulted in powder charge variations of roughly ±0.3 to 0.4 grains through the volumetric measure, pushing velocity SDs up into the 25 fps range—too high for our match-grade standard.
- Switching to Ball Powder (Winchester StaBall 6.5): To achieve tight volumetric consistency on a progressive press, switching to a spherical ball powder was the logical next step. StaBall 6.5 matches the burn rate of H4350 while metering through powder measures like a dream.
Finding the Sweet Spot with StaBall 6.5
Working up our ladder test with Winchester StaBall 6.5 and the 120-grain Berger hybrids, we zeroed in on an exceptional node:
- Rockstar Charge Weight: 37.8 grains of StaBall 6.5
- Average Velocity: ~2,800 fps
- Group Size: A five-shot validation group measuring an astonishing 0.339 inches (well under our half-MOA requirement).
- Velocity SD: 11.1 fps (extremely consistent for progressive-loaded ammo).
Dropping down slightly to 37.7 grains yielded identical SD numbers, but 37.8 grains gave us the ultimate combination of razor-sharp precision and node stability.
Conclusion
By pairing the efficiency of the Dillon RL550 with a fine-metering ball powder like Winchester StaBall 6.5, you truly can have your cake and eat it too—producing sub-half MOA, match-ready PRS ammunition in a fraction of the time without sacrificing consistency.
What is your preferred cartridge and powder combination when loading precision rifle ammunition on a progressive press? Drop a comment below!
Get the Gear
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear


































































