In this project, we are tackling two exciting topics. First, we are getting a close-up look at Redding’s Master Hunter die set in 6.5 Creedmoor—what I consider to be the ultimate precision hunting loading die set. Second, we are loading up the absolute all-time best Ultimate Reloader 6.5 Creedmoor load and taking it out to extreme distances.
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
About the Master Hunter Die Set
The Redding Master Hunter die set stands out because it combines two incredible tools: the full-length sizer with a free-floating carbide expander ball, and my absolute favorite, the Competition Seating Die.
Taking a look inside the full-length sizer, you’ll find the free-floating carbide expander ball on the spindle. Because it is highly polished carbide, you do not need to use case lube inside the case necks—it is that slick, and it will last pretty much forever. Furthermore, its self-centering design helps preserve the concentricity of your brass.
The Competition Seating Die is equally impressive. It utilizes a sliding sleeve that perfectly centers the case as it goes up before the bullet starts to get seated by the seating plug. This sliding collar heavily enhances concentricity. The die features a micrometer top, allowing you to dial in seating depths to the exact thousandth of an inch. Inside, I utilized a VLD seating stem, which perfectly fit the profile of the Sierra 145-grain Tipped GameKing (TGK) bullets we used for this test.
Loading the All-Time Best 6.5 Creedmoor Load
To set up the sizer on our Redding T7 turret press, I threaded the die in until it contacted the shell holder, opting for a bit of cam-over to ensure maximum shoulder bump for hunting reliability. Using Imperial Sizing Die Wax, the cases sized beautifully.
After wiping off the lube, priming with small rifle primers, and chamfering the case mouths for smooth feeding, it was time to drop the powder. We went with our absolute favorite, tried-and-true 6.5 Creedmoor load: 40.0 grains of Hodgdon H4350. When paired with bullet weights in the 135 to 145-grain range—specifically the 145-grain Sierra TGK—this load is absolutely amazing.
(Note: Always consult published load data before reloading.)
Using the micrometer on the Competition Seating Die, I easily dialed the seating depth down exactly 0.158″ to hit my target Cartridge Overall Length (COAL) of 2.800″ dead on the money.
To verify the quality of the die set, I checked the loaded ammunition on a concentricity gauge. The runout measured roughly +/- 0.0005″ (half a thousandth of an inch). That is match-grade territory, proving that these dies load incredibly straight ammunition.
Range Results: From 100 Yards to 0.8 Miles
To see what this ammunition could truly do without the variable of a lightweight hunting rifle stock, I tested it in our heavy Ultimate 6.5 Creedmoor PRS-style build.
At 100 yards, firing with a muzzle brake, both F-Class John and I shot multiple 5-shot groups hovering around 0.593″ to 0.826″. However, knowing this rifle and load were capable of more, I removed the brake and threaded on an Area 419 Maverick suppressor to adjust the barrel harmonics. The result? A stunning 5-shot group measuring just 0.391 inches (0.373 MOA). For a heavy hunting bullet, that is phenomenal.
We then moved to the Ridgeline to stretch its legs:
- 335 Yards: Easily hammered a rock chuck-sized steel plate.
- 706 Yards: After one shot to figure out the wind hold, we slapped the steel with authority.
- 1,390 Yards (0.8 Miles): We aimed at a rock chuck target set across the canyon. After walking the first few shots in by spotting dirt splashes, I connected with the target three successive times in a row.
Conclusion
Any time you can string three consecutive hits on a small target at 0.8 miles, you know you have something special. The combination of the Sierra 145-grain TGK, 40.0 grains of H4350, and the extreme concentricity provided by the Redding Master Hunter dies created a load that is capable of almost any North American long-range hunting scenario. I believe the Master Hunter die set is more than just a hunting die set—it is a fantastic choice for any precision reloading application.
Get the Gear
Redding Master Hunter Die Sets
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear


































































