Tag: Ultimate Reloader

Page 52 of 53
1 50 51 52 53

Poll: What Rifle Cartridge Do You Reload Most Often?

If you’re like me, as soon as you get a new rifle, you start to anticipate reloading for it. There’s nothing quite like the satisfaction of seeing your groups shrink after careful planning and successive batches of reloads. For most of us, there’s a particular rifle cartridge that we tend to reload most frequently. Which […]

AR-308 – Precision Loading Pt. 4 – Seating Bullets Checking Concentricity

In my last video, I covered priming and charging cases, see AR-308 – Precision Loading Pt. 3 – Priming and Charging Cases. Now we need to seat bullets, and also check/correct for concentricity of the bullet. If we have a consistent charge, a benchrest primer, consistent case neck thickness, and a properly/optimally seated bullet, we’re […]

AR-308 – Precision Loading Pt. 3 – Priming and Charging Cases

In my last post, I walked through the process of using the Redding Case Neck Gage to sort our 7.62×51 (Military 308 Winchester) brass into buckets based on both thickness and uniformity. Below is a picture showing the distribution. The numbers I’m using here (0.016″ +/- .0005″ for example) reference the total variation in thickness, […]

AR-308 – Precision Loading Pt. 2 – Case Neck Thickness and Uniformity

Now that we’ve cleaned, sized, trimmed, and finished the basis brass prep steps, it’s time to sort the brass that we’ve prepped so that we can uses batches of consistent brass for precision loads. We are now at the final stage of brass prep as covered in the brass prep overview post. For this stage, […]

AR-308 – Precision Loading Pt. 1 – Case sizing and trimming

It’s time to start loading some precision 308 Winchester ammo for the LR-308 project! Our rifle is all tuned up and tricked out, and now we need some capable ammunition to shoot. In this video, I’ll walk through the process of validating sizing die setup with the new Redding Instant Indicator, and we’ll see how […]

Page 52 of 53
1 50 51 52 53



Reloading Safety

Polls