Category: Uncategorized
AR-308 – Precision Loading Pt. 2 – Case Neck Thickness and Uniformity
Now that we’ve cleaned, sized, trimmed, and finished the basis brass prep steps, it’s time to sort the brass that we’ve prepped so that we can uses batches of consistent brass for precision loads. We are now at the final stage of brass prep as covered in the brass prep overview post. For this stage, […]
AR-308 – Geissele SD-C Trigger Upgrade
A while back, I posted the Geissele trigger install video while building the AR-MPR AR-15 rifle. I liked the Geissele trigger used on the AR-MPR project so much, that I decided to buy one for the AR-308 project – this time a different version. In this video, we’ll remove the factory trigger, and replace it […]
AR-308 – Project Phases and Details
Now that I’ve formally kicked-off the AR-308 project, I wanted to take a moment to give a high level overview of what I’ll cover over the course of this project. The goal is to learn about the .308 Winchester / 7.62x51mm cartridge family, take a close look at the DPMS LR-308 rifle platform, and also […]
AR-308 – Loading the LR-308b – Project Kickoff
I’m excited to announce a new project we’ll be working through here on http://ultimatereloader.com that will extend some of what we did with AR-MPR, but this time we’ll focus on the “big brother” to the AR-15- the AR-10 platform, specifically the DPMS LR-308B. For optics, we’ll get an up-close look at the Bushnell/Millett TRS-1 tactical […]
Poll: What Rifle Case Lube Do You Use?
One of the frequently debated topics related to rifle cartridge loading is what case lube to use. Now you have a chance to let us know what you use! Please drop a comment to describe why, or if your lube type is not on the list. Thanks, Gavin
AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding
In my last post, outlined some ideas and goals for talking the slop out of the fit between the upper and lower receivers on the AR-MPR rifle. The first step is to remove the gaps between the sides of the upper receiver lugs, and the channels at the front and back of the lower receiver. […]
AR-MPR: Accurizing the Upper Receiver – Overview
A while back, I posted some AR-MPR rifle accurizing plans. This was my first-pass at enhancing the accuracy of the AR-MPR rifle. Since this post, I have had a few range visits (sorry, don’t have photos as the range does not permit photography) where I did not see the kind of accuracy and consistency that […]
Poll: What Progressive Reloading Press Do You Use Most?
I would love to find out more about what equipment people are using for metallic cartridge reloading. Please pick the press that you use most frequently. If your most used press is not listed here, please leave a comment! Thanks, Gavin
