Why I NEVER Buy 44 Mag Ammo (Berry's Bang For Your Buck)

Shooting 44 Magnum is a lot of fun but it gets expensive in a hurry with factory ammunition! A handloader can greatly reduce the cost of practice ammunition by loading 44 Magnum ammunition with Berry’s plated bullets. In this video, we continue our “Bang for the Buck” series by looking at Berry’s 44 Magnum 220-grain Flat Point and 240-grain Target HP Bullets. We’ll cover two different bullets loaded to different levels and fired from a sturdy revolver.

Disclaimer

Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Articles on this website are derived from original video content and may utilize artificial intelligence (AI) tools for initial drafting, transcript processing, and editorial refinement; no AI technology independently generates or verifies technical instructions or safety data. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.

Cartridge Background

We’ve had fun doing several stories regarding the 44 Magnum cartridge.

A 44 Magnum revolver can fire either 44 Magnum or 44 Special cartridges and can handle light target loads up to very powerful hunting and bear-defense loads.

44 Magnum revolvers are available in a wide range of sizes and weights. One of the lightest on the market is the S&W 329PD which weighs only 26 ounces! On the heavier end, the S&W Performance Center 629 Magnum Hunter weighs in at a whopping 62 ounces. Most 44 Magnum revolvers fall somewhere in between those two examples. Lighter weight is obviously easier to carry, but the recoil with full power loads can be brutal.

There are also 44 Magnum lever action rifles such as the Henry H12 Protector Carbine. Unfortunately we didn’t have one on hand for our testing. Perhaps in the future?

Components

We chose two different .44-caliber Berry’s plated bullets for this story: the 220-grain Flat Point and the 240-grain Target Hollow Point.

Each of these bullets is rated for a maximum velocity of 1850 fps, which makes them ideal for use from a carbine or from a revolver. The Flat Point designs make them safe to use in traditional tubular magazine lever actions. Flat Point bullets are also the traditional shape of revolver bullets. I’ve worked with the 240-grain Target Hollow Point bullet before.

I decided to use Hodgdon’s Titegroup powder for the lighter loads and H110 for the heavy load since those powders have worked so well for us in the past.

Load Data and Chronograph Results

Aside from the expense of shooting full-power factory ammo, the 44 Magnum has pretty obnoxious muzzle blast and recoil. There are two ways a handloader can reduce recoil. The first is by lowering the bullet weight. All else being equal, a 220-grain bullet is going to produce less recoil than a 240-grain bullet. The second way is by reducing the powder charge and muzzle velocity. The 220-grain Berry’s Flat Point bullet seemed a natural for me to reduce the recoil of the mighty 44 Magnum.

Here are my results as measured from a 7.5” Ruger Super Blackhawk Bisley Hunter.

6.0 grains of Titegroup averaged a mild 819 fps and was a joy to shoot! 8.0 grains of Titegroup was more robust producing 1080 fps. These numbers correlate closely with Hodgdon’s published data, which uses the same bullet.

A 240-grain bullet has become standard for the 44 Magnum and can be used in light loads or more powerful loads. Our two powder charges produced quite different results.

9.0 grains of Hodgdon Titegroup averaged 1103 fps with a tight SD of 11 fps. This was a very satisfying load to use at the range. It had enough power to feel like a magnum revolver, but with very good accuracy and easy-to-manage recoil from my 7.5” Ruger.

23.5 grains of H110 is a stout-recoiling load that produces a lot of muzzle flash. It too had a very tight SD of 11 fps, but averaged 1330 fps. This is a near-maximum 44 Magnum load. Hodgdon shows a 24-grain max load at 1522 fps, but that’s from an 8.275” pressure barrel. This explains the difference in velocity from my 7.5” revolver, which has a barrel-cylinder gap.

Slow-burning H110 is ideal for very powerful loads along with several other slower burning pistol powders. Titegroup has proven very good for producing accurate, economical and easy-shooting 44 Magnum revolver loads.

H110 is more useful when full 44 Magnum power is desired. It’s great that both of these Berry’s bullets can handle up to 1850 fps, which we never even approached using our revolver. It would be fun and interesting to shoot these loads from a 44 Magnum lever action rifle!

Economics

The Berry’s .44-caliber 220-grain Flat Point bullets are available for as little as $0.19 per bullet and the 240-grain Target Hollow Point can be had for as low as $0.21 per bullet.

I primarily used once-fired R-P brass, which I obtained by previously shooting factory ammo. Since the brass was on hand, I didn’t add the cost of brass into the calculation for the cost.

Conclusion

Firearms manufacturers often put a lot of effort into building high-quality 44 Magnum revolvers and owners of them are often proud.

Instead of just keeping them at home, it’s great to get out and shoot the big revolvers whether double action or single action. Handloads with Berry’s plated bullets are a great way to reduce the cost of shooting these wonderful guns.