In this video you will see how to load 44 magnum ammunition with the Redding T-7 Turret reloading press. Specifically, you’ll see the following:
- Changing calibers from 357 Magnum to 44 Magnum (sliebar priming system, shell holder)
- Use of a Hornady Lock-N-Load case-activated powder measure
- Sizing/Depriming, Priming, Expanding, Powder Charging, Bullet seating/Crimping all in one operation on the press
Posts Tagged ‘T-7’
Redding T-7 Loading 44 Magnum (HD)
Saturday, July 11th, 2009Redding T-7 Loading 357 Magnum (HD)
Saturday, July 11th, 2009Redding T-7 Loading .223 Part II (HD)
Saturday, May 30th, 2009This second video in a two video series finishes the demonstration of how to change calibers and load .223 reminton ammo on a Redding T-7 reloading press. In this installment, you’ll see the case charging process with the Redding #BR3 benchrest powder measure, and the bullet seating process.
Note that for high-volume .223 Remington reloading, it is possible to use a case-activated powder measure (see the 44 Magnum Redding video for more detail)
Redding T-7 Loading .223 Part I (HD)
Saturday, May 30th, 2009This first video in a two video series demonstrates how to change calibers and load .223 reminton ammo on a Redding T-7 reloading press. In this installment, you’ll see the process of setting up the press for sizing and depriming, cleaning primer pockets, primer pocket chamfering, and priming on the Redding T-7 Turret reloading press.
Redding T-7 Press – Loading 30-06 Part III (HD)
Thursday, May 21st, 2009The third and final part in a series of videos demonstrating how to setup the T-7 Turret reloading press and load 30-06 rifle cartridges.
