I recently had so much fun loading 300 Blackout with Berry’s 220 grain plated bullets, it made me think about what else I could do with these bullets. Then it came to me: how about loading 7.62x39mm with them? Shortly thereafter I was setting up a reloading press to start experimenting. I was successful in […]
Tag: Reloading
TESTED: Berry’s 220gr 300 BLK Bullets
There’s no doubt: Suppressed 300 Blackout Subsonic shooting is a TON of fun! When I think of close-quarters shooting with an AR-15, 300 Blackout subs are my go-to ammunition. The problem? These subsonic 300 Blackout loads require 30 caliber bullets in the 190-250 grain range which can get real expensive real quick! In this article […]
Resources: Get Started Reloading
Recently I’ve seen a HUGE surge in interest from people wanting to start reloading their own ammunition! This trend isn’t surprising given current world events which is a bit of a “wake up call” for gun owners that don’t yet load their own ammunition. Better late than never! In this article I’ll share some resources […]
Standing Together In Crisis: Thoughts from Ultimate Reloader
These are no-doubt difficult times for everyone. It’s hard to believe how quickly and deeply the world has been affected by the COVID-19 (Coronavirus) pandemic. My heart goes out to all of those suffering around the world. I thought this would be a good time to give a quick personal update, and also share some […]
NEW Die Lock Rings from LEE Precision
Sometimes you get so accustomed to things you have a “double take” when they change. That was my reaction when I recently unboxed a LEE Pro 1000 reloading press. I noted several changes with the press, most obvious was the new die lock rings that came with the press. In this article, I’ll introduce you […]
300 PRC Budget Build part 2: Barrel and Stock Work, Break-In
This “300 PRC Budget Build” has been one of my favorite builds so far, and a perfect follow-on to taking Gordy Gritters’ Precision Rifle Building Class. I used this build as an opportunity to take on some new challenges, and to see what I could do with a factory Remington 700 rifle. If you haven’t […]
Spotlight on D-M Targets: AR500 Steel Targets and Hangers
Anyone with acreage and long-range rifles needs a bunch of steel targets! And that’s what I’ve been working on lately, getting the UR Ranch setup for some serious shooting and training. Recently, I’ve become friends with Seth Gardner of D-M Targets from Washington State. He shoots in the same circles, and is super-involved in the […]
Forster Original Case Trimmer: Trimming and Neck Turning
Case trimming is a super-important part of the reloading process for bottleneck rifle cartridges. And for those concerned with maximum accuracy, neck turning is also an important capability and consideration. So what if you could buy one tool that would both trim cases AND turn case necks… Enter the Forster Original Case Trimmer, the subject […]
300 PRC Budget Build part 1: Action Blueprinting
I’m excited to kick off my 300 PRC “Budget Build” in this article. I’ve been working on putting together all of the related pieces and parts, have taken training with Gordy Gritters, and have previously completed a 300 PRC full-custom build, and now it’s time for the 2nd 300 PRC build! In this story I’ll […]
Loading 6.5 PRC with MEC Metallic Gear End-To-End
It’s time to start loading some 6.5 PRC, and I thought this would be a great opportunity to showcase the MEC Metallic lineup of reloading gear! In this post, I’ll show some MEC gear I haven’t shown yet, and walk through the end-to-end process of reloading 6.5 PRC in the video below. Let’s get to […]
Brass Deals from Capital Cartridge: Coupon Code and Cash for Brass
If you’re looking for good deals on brass, consider previously fired brass! Capital Cartridge offers a wide variety of different options for previously fired brass, including specialty calibers. Here’s an update on how you can save money at Capital Cartridge, and also get reimbursed for your used brass! Save 10% on Your Capital Cartridge Order […]
Dillon RL-550C: Unboxing, Overview, Setup, Loading Rifle and Pistol Ammunition
The Dillon RL-550C is arguably the most “tried and true” progressive reloading press on the market today. This press offers a blend of affordability, quality, and precision that’s truly unique. In this article, I’ll cover the RL-550C in-depth, starting with an unboxing, and finishing with loading rifle/pistol plus some insights into issues that you as […]
6mm Creedmoor PRS Load Development
I have many different approaches to load development. In fact, I tend to change my process just about every time I develop a load. The specific method and process I’ll use is based based on the tools, components I have on hand, and my needs/requirements for the ammunition I’m developing. In this article, I’ll outline […]
Timney HOWA 1500 Trigger Upgrade: Install, TriggerScan, Shooting
I consider the trigger to be one of the most important parts of a precision rifle. For me, the dynamics of the trigger have a huge effect on how consistently I can shoot a rifle, espeically when that rifle isn’t “locked down” in a bench rest. Recently I performed a rebuild on a HOWA 1500 […]
SHOT Show 2020: Interview With Steve Dillon
I’ve long wondered about the origins of Dillon Precision and Dillon Aero. While at the 2020 SHOT Show, I ran into Steve Dillon, son of Mike Dillon who started both companies. The following is the fascinating discussion I had with Steve Dillon about Mike Dillon’s legacy, the origins of Dillon Aero, how Dillon Precision came […]
SHOT Show 2020: Five New Products from Federal Premium
Federal Premium has been BUSY! At the 2020 SHOT Show, I had the opportunity to hear about all of these new products spanning muzzle loader, defensive shotshell, lever-action, long-range rifle, and defensive pistol! Here’s the “full story”! NEW! FireStick Muzzle Loader Technology If you are a muzzle loader shooter, you have likely experienced some of […]
SHOT Show 2020: New from Mark 7 Reloading
One of the exciting booth visits this year was the Lyman and Mark 7 booth! (see my Lyman SHOT Show 2020 / new products post HERE). Mark 7 Reloading has been doing some super-interesting work in the reloading space, and for 2020, things are getting INSANE. Here’s my interview with Lyman/Mark 7 engineer Spencer Karoll: […]
SHOT Show 2020: In-Depth ELR Discussion with Emil Praslick
There are two predominant trends in rifle shooting I’ve observed in recent years. First, people are interested in greater levels of precision (rifles, ammunition, shooting). Second, people are shooting at longer and longer ranges. So it’s no surprise that ELR (Extreme Long Range) shooting has become MUCH more popular in the last few years. And […]
SHOT Show 2020: ATN New Products
ATN is rapidly advancing electro-optics, and the underlying technologies that enable these exciting products. This year at the SHOT Show, I caught up with the head of marketing, Steve Lemenov to hear about ATN new products. Here is the discussion we had. New for ATN, Clip-On Thermal: TICO LT This is big news! Later in […]
SHOT Show 2020: Jason Hornady Interview
As an enthusiast of a paticular product, have you ever wondered: who are the people behind this company, this brand, and this product? One of my favorite things about my job is when I have the opportunity to get to know someone that’s been influential in my industry. At the 2020 SHOT Show, I had […]
SHOT Show 2020: Starline Brass
It’s always great to talk with the team at Starline Brass. The person I talk with most related to Starline Brass technical issues is Hunter Pilant, one of the engineers at Starline. Here’s the discussion I had with Hunter at the 2020 Shot show! Starline New Products This last year Starline has released some great […]
LEE Pro 1000: Unboxing, Overview, Setup, Loading 45 ACP
My very first reloading press was a LEE Pro 1000. I had purchased a 44 Magnum revolver for hiking carry, and found that I really liked to shoot it. The problem? 44 Magnum ammunition is not cheap! So I started to research reloading my own ammunition. At the time I had two small children and […]
SHOT Show 2020: Bryan Litz talks Ballistic Advancements
If you’re serious about ballistics and long-range shooting, you know about Bryan Litz’s work. As the founder of Applied Ballistics, and the chief ballistician at Berger Bullets, he has made significant contributions to the field of modern ballistics. And that’s what I wanted to talk with Bryan about: the last 10 years and the next […]
Shot Show 2020: Forster Products
It’s always great to see the Forster Products team at the SHOT show! At the 2020 SHOT Show I talked with Scott Kempel, one of the people I work with frequently from Forster Products. We talked about Scott’s role at Forster, new products (namely the powder measure which will be introduced later this year), as […]
SHOT Show 2020: New from RCBS
If you’re a fan of the “Green Presses and Gear” you’ll want to check out what’s new from RCBS for 2020. That’s exactly what I talked about with Will at the RCBS during the 2020 SHOT Show. Check it out! Coming Soon to UR: New RCBS Rebel Press I get excited every time I see […]
