Tag: Reloading

Page 17 of 31
1 15 16 17 18 19 31

5 Shots, One Hole: 6 Dasher Load Development Initial Results

Load development is a critical pathway that leads to “great things” for those of us that are obsessed with precision and accuracy. What’s difficult about load development is how time consuming it can be. Variables include brand of brass, powder type, powder charge, primer type, bullet type, bullet seating depth, and more. If you multiply […]

NEW Expanding Mandrel Die from L.E. Wilson

I do a lot of shooting with loads using brand new brass. And the results can be downright impressive! One challenge I’ve had with loading new brass (a frequent issue) is excessive neck tension. New brass necks tend to come a tad undersize (0.001″-ish). There are also situations where you’ll find dented or imperfect case […]

TESTED: NEW Bergara B14-R Precision Rimfire Trainer

Recently, I had some GREAT times shooting with Seth Gardner of D-M Targets. Towards the end of our shooting trip, Seth setup a precision rimfire rifle, one of his Rimfire Spinner targets, and some small targets out to about 85 yards. 10 minutes later I exclaimed: I’VE GOT TO GET SETUP FOR PRECISION RIMFIRE! The […]

NEW Pile Driver Bullet Puller from Frankford Arsenal

Breaking down ammunition is not what most reloaders want to spend their time doing! It’s typically a slow process, and can be quite taxing on the nerves as well (Example: breaking down 200 rounds with a hammer-type bullet puller). What’s more: many bullet pulling setups require caliber-specific parts. Enter the Frankford Arsenal Pile Driver which […]

9mm 147gr Subsonic “Magic Load”, Hard to Believe!

Now that I have suppressors, I’m very interested in subsonic loads for pistols and rifles that I shoot frequently. I shoot a lot of 9mm, so I recently purchased a Bear Creek Arsenal threaded Glock 17 barrel that has performed really well! Therefore, the development of a reliable 9mm subsonic load was “top of list” […]

Lee Loadmaster Unboxing/Setup, Loading 9mm

It’s time to take another look at the LEE Loadmaster! I’ve been working with this press since 2008, but haven’t yet shown an unboxing/setup story for it, and now is that time! Furthermore, we’ll do some upgrades while we’re at it! LEE Loadmaster: What’s In the Box The LEE Loadmaster comes with most everything you’ll […]

A Tour of the UR Revolver Collection

I really enjoy revolvers. I enjoy looking at them, taking care of them, loading ammunition for them, shooting them, and just generally appreciating them!  So I thought it would be fun to share with you all my collection of Smith and Wesson revolvers. Model 1905 Snub Nose 38 Special, Rare 2″ Barrel This model 1905 […]

TESTED: New 205gr 30-Cal Elite Hunter Bullets from Berger

Berger has been busy developing and releasing new bullets, continuing to innovate in popular long range categories. I recently had the privilege to get my hands on some pre-release sample bullets for one of the exciting new bullets Berger is releasing: the Berger 30 Caliber 205 Grain Elite Hunter bullet, all-new for Spring 2020. In […]

Save 10% on UFO Press Lights, LEE Content Update

It’s time for some updates on LEE press content (coming soon) and some updates on KMS Squared UFO Press Lights! Lots of great stories coming, and it’s always great to save some $$$ on top-quality gear. UFO-LM: A great Light for the LEE Loadmaster Just Got Better If you have a LEE Loadmaster, and are […]

Mr. Bullet Feeder: Unboxing, Setup, Loading 9mm

High-volume loading is all about optimizing the process. If you want high throughput,  you can’t afford to have any “bottlenecks” in your reloading workflow. And that’s where a bullet feeder comes in handy! In this article, I’ll continue where I left off (see Mark 7 Evolution Overview/Setup) with my Mark  7 Evolution “boot up”. This […]

BAT TR Action: Detailed Overview and Build Kick-Off

There are some times when it pays to spend more for top quality. If you’re building a precision rifle, the action is one of the most critical investments you’ll make. I’ve long been wanting to try out an action from BAT machine, and now is that time! In this article I’ll give an overview of […]

Subsonic AK: Berry’s 220 grain Plated Bullets + Starline Brass

I recently had so much fun loading 300 Blackout with Berry’s 220 grain plated bullets, it made me think about what else I could do with these bullets. Then it came to me: how about loading 7.62x39mm with them? Shortly thereafter I was setting up a reloading press to start experimenting. I was successful in […]

TESTED: Berry’s 220gr 300 BLK Bullets

There’s no doubt: Suppressed 300 Blackout Subsonic shooting is a TON of fun! When I think of close-quarters shooting with an AR-15, 300 Blackout subs are my go-to ammunition. The problem? These subsonic 300 Blackout loads require 30 caliber bullets in the 190-250 grain range which can get real expensive real quick! In this article […]

Resources: Get Started Reloading

Recently I’ve seen a HUGE surge in interest from people wanting to start reloading their own ammunition! This trend isn’t surprising given current world events which is a bit of a “wake up call” for gun owners that don’t yet load their own ammunition. Better late than never! In this article I’ll share some resources […]

Standing Together In Crisis: Thoughts from Ultimate Reloader

These are no-doubt difficult times for everyone. It’s hard to believe how quickly and deeply the world has been affected by the COVID-19 (Coronavirus) pandemic. My heart goes out to all of those suffering around the world. I thought this would be a good time to give a quick personal update, and also share some […]

NEW Die Lock Rings from LEE Precision

Sometimes you get so accustomed to things you have a “double take” when they change. That was my reaction when I recently unboxed a LEE Pro 1000 reloading press. I noted several changes with the press, most obvious was the new die lock rings that came with the press. In this article, I’ll introduce you […]

300 PRC Budget Build part 2: Barrel and Stock Work, Break-In

This “300 PRC Budget Build” has been one of my favorite builds so far, and a perfect follow-on to taking Gordy Gritters’ Precision Rifle Building Class. I used this build as an opportunity to take on some new challenges, and to see what I could do with a factory Remington 700 rifle. If you haven’t […]

Spotlight on D-M Targets: AR500 Steel Targets and Hangers

Anyone with acreage and long-range rifles needs a bunch of steel targets! And that’s what I’ve been working on lately, getting the UR Ranch setup for some serious shooting and training. Recently, I’ve become friends with Seth Gardner of D-M Targets from Washington State. He shoots in the same circles, and is super-involved in the […]

Forster Original Case Trimmer: Trimming and Neck Turning

Case trimming is a super-important part of the reloading process for bottleneck rifle cartridges. And for those concerned with maximum accuracy, neck turning is also an important capability and consideration. So what if you could buy one tool that would both trim cases AND turn case necks… Enter the Forster Original Case Trimmer, the subject […]

300 PRC Budget Build part 1: Action Blueprinting

I’m excited to kick off my 300 PRC “Budget Build” in this article. I’ve been working on putting together all of the related pieces and parts, have taken training with Gordy Gritters, and have previously completed a 300 PRC full-custom build, and now it’s time for the 2nd 300 PRC build! In this story I’ll […]

Loading 6.5 PRC with MEC Metallic Gear End-To-End

It’s time to start loading some 6.5 PRC, and I thought this would be a great opportunity to showcase the MEC Metallic lineup of reloading gear! In this post, I’ll show some MEC gear I haven’t shown yet, and walk through the end-to-end process of reloading 6.5 PRC in the video below. Let’s get to […]

Brass Deals from Capital Cartridge: Coupon Code and Cash for Brass

If you’re looking for good deals on brass, consider previously fired brass! Capital Cartridge offers a wide variety of different options for previously fired brass, including specialty calibers. Here’s an update on how you can save money at Capital Cartridge, and also get reimbursed for your used brass! Save 10% on Your Capital Cartridge Order […]

Dillon RL-550C: Unboxing, Overview, Setup, Loading Rifle and Pistol Ammunition

The Dillon RL-550C is arguably the most “tried and true” progressive reloading press on the market today. This press offers a blend of affordability, quality, and precision that’s truly unique. In this article, I’ll cover the RL-550C in-depth, starting with an unboxing, and finishing with loading rifle/pistol plus some insights into issues that you as […]

6mm Creedmoor PRS Load Development

I have many different approaches to load development. In fact, I tend to change my process just about every time I develop a load. The specific method and process I’ll use is based based on the tools, components I have on hand, and my needs/requirements for the ammunition I’m developing. In this article, I’ll outline […]

Timney HOWA 1500 Trigger Upgrade: Install, TriggerScan, Shooting

I consider the trigger to be one of the most important parts of a precision rifle. For me, the dynamics of the trigger have a huge effect on how consistently I can shoot a rifle, espeically when that rifle isn’t “locked down” in a bench rest. Recently I performed a rebuild on a HOWA 1500 […]

Page 17 of 31
1 15 16 17 18 19 31
For Commerical Inquiries:
Ulitmate Reloader Commercial Services



Reloading Safety

Polls