In this video, we’ll use the Hornady OAL Gage measurements from our first Phase II loading video: AR-MPR: Phase II – Determining Max COL with OAL Gage and measure the dimensions of the cartridge and magazine to determine the optimal bullet seating depth for the bullet and rifle in question. We’ll then use the Redding […]
Tag: Reloading Blog
The only reloading blog with comprehensive coverage and HD videos of the industry’s leading progressive reloading equipment for both pistol and rifle
AR-MPR – OnTarget Software – Measure Groups Easily
For AR-MPR, I’m chasing a .5 – .75 MOA accuracy goal. Initially, I started with 3-shot groups when I function tested the rifle, but have upgraded the challenge to “consistent 5-shot groups at .5 – .75 MOA”. In order to track my progress, I’ve taken a hint from Paul over at http://accurateshooter.com – use the […]
AR-MPR: Phase II – Charging Cases with the Redding 3-BR and Hornady Auto Charge
In this video we’ll continue the precision loading process by using the Redding 3-BR powder measure and the Hornady Auto Charge to dispense powder loads. Next, we’ll cover calculating optimal seating depth, and seating the bullets. Thanks, Gavin http://ultimatereloader.com/wp-content/uploads/2010/11/AR-MPR-logo-wide-small.jpg
AR-MPR: Phase II – Rifle Accurizing Plans
I just read a great article written by Robert Whitley of www.6mmar.com fame that was posted on the http://accurateshooter.com blog: What Makes an AR Accurate — Whitley Offers Answers Talk about good timing! This post helped me plan the first wave of accurizing activities for the AR-MPR rifle. My goal is to remove any factors […]
AR-MPR: Phase II – Sizing Depriming Priming .223 Remington
In this video we’ll start the precision loading process by lubing, sizing, depriming, and priming cases. We’ll walk through the features of the Redding Big Boss II, show how to lube .223 cases, validate sizing die setup, and then size/deprime/prime the cases. Next, we’ll cover charging the cases with the Redding 3-BR benchrest powder measure […]
AR-MPR: Phase II – Determining Max COL with OAL Gage
One of the important things to know before loading rifle ammunition is how far out (shallow) you can seat bullets, and what the optimized seating depth is for a particular bullet for your rifle and shooting application. For AR-MPR Phase II, we’re going for maximum accuracy, and also need to assure proper feed characteristics so […]
AR-MPR: Phase II Hornady Equipment Overview
In my last post, I gave an overview of some of the Redding equipment that we’ll be showcasing during Phase II of the AR-MPR project. I this post, I’ll cover some Hornady equipment that will also be used for this precision loading phase of the AR-MPR project. We’ll cover more Hornady gear (such as the […]
AR-MPR: Phase II Redding Equipment Overview
For Phase II of the AR-MPR we will be focused on precision handloading techniques and load development. For this phase of the project, I decided to showcase some of the popular Redding Reloading products that have an outstanding quality reputation. Here, we’ll talk briefly about each of these products. The Big Boss At the heart […]
AR-MPR: Phase II Kick-Off
Now that we’ve build and function checked the AR-MPR rifle (See Brownells Videos for Complete Details), it’s time to move from Phase I (Build) to Phase II – Precision Loading and Rifle Accurizing/Tuning. This rifle has already proven that it’s capable of meeting the original accuracy goal of .5 – .75 MOA (See Range Report […]
AR-MPR 1st Range Report – Unexpected Results
The mission for the first range trip with the AR-MPR rifle was to really do two things: First, it was about function checking the rifle. Second, it was about sighting in the Nikon Monarch 6-24x50mm riflescope. A third and less important goal was to see how accurate I could shoot this rifle based on […]
AR-MPR: Mounting Nikon Monarch Scope and M-223 Mount
In this post, we’ll look at what’s involved in mounting the Nikon Monarch 6-24 x 50mm riflescope to our AR-15 using the Nikon M-223 scope mount. Before we get on with the video, let’s take a look at the finished product: What’s nice here about using the Midwest Industries quad rail handguard, is the “continuous […]
AR-MPR – Nikon Optics Overview
One of the popular sayings amongst video professionals is “Sound is 50% of video”. The point is- many folks focus almost entirely on the picture quality in their videos, and neglect to pay enough attention to getting proper sound in their videos. Why do I mention this here? Well, 50% of a good precision rifle […]
AR-MPR: Build Part 7 – Lower – Buttstock and Mating Upper Lower
In this, the final AR-15 assembly video, we’ll walk through the installation of the takedown pin and the buttstock assembly. Finally, we’ll put the upper and lower together for the first time and establish basic functionality (formal function check to follow in subsequent posts). After all of the planning and work that went into getting […]
New Tools Section on Ultimate Reloader
One of the things I’ve been meaning to do for a while now is to provide a reloading costs calculator so that readers can answer the age old question – “How much will I save if I reload?”. You can find this resource under “Tools” in the info center (left pane on home page) or […]
AR-MPR: Build Part 6 – Lower – Trigger Grip and Safety
Continuing our way through the lower build steps, in this video, we’ll look at installing the Geissele national match trigger assembly, the trigger guard, the safety selector lever assembly, and the pistol grip. Next, it’s on to the stock and final touches! Thanks,Gavin
Great Website- AccurateShooter.com | 6mmbr.com
Hey all- one of the things I like to do is help to promote websites that are run by like-minded individuals (share many of the motivations and passions that I have). One of those sites is AccurateShooter.com and 6mmbr.com – now the same site: http://accurateshooter.com This website is run by Paul McMenamin – a great […]
AR-MPR: Build Part 5 – Lower – Magazine Catch Bolt Catch Pivot Pin
In this video, we’ll start the assembly of the lower by walking through the installation of the magazine catch, the bolt catch, and the pivot pin. You’ll see a trick for installing the pivot pin that makes use of a dulled razor blade, and a modified section of drill rod. From the video, in this […]
Outdoor Shots: California Condor in Flight
There are times in life when reality seems more like floating in a dream. One of those times for me was the trip I took with my wife last year to Zion National Park and Bryce Canyon. I had seen pictures of these places before our trip, but I was really blown away at how […]
Shooting and Reloading Versatility – 357 Magnum Delivers
Let’s face it, some guns are more practical than others. A Glock 19 for range duty and carry is one of the more “utilitarian” gun values out there. An AR-15 pistol on the other hand- we’ll I’m not sure exactly what they’re for, but they sure are fun to shoot! Regarding versatility, the […]
Ultimate Reloader is moving to Feedburner for subscriptions and RSS!
Hey all- I really appreciate the response that I’ve gotten from you all regarding email and RSS subscriptions! This is a great way to stay posted on what’s going on here at www.ultimatereloader.com . I have however had trouble with my my current (as of yesterday) solution for email notifications. To make a long story […]
2011 Shot Show: Celebrity Shooters at the Hornady Booth
Another reason I wish I was at the SHOT show! Celebrity Shooters at the Hornady Booth – SHOT Show 2011
2011 SHOT Show Starts Today in Las Vegas!
Hey everyone, hope some of you have the opportunity to attend the SHOT show this year… I we won’t be attending, but I do want to cover as much reloading product information as possible from afar… For starters, here’s some booths you may be interested in visiting: Hornady Manufacturing: Booth 13145Redding Reloading: Booth 16151Dillon Precision: […]
Hornady Lock-N-Load Bullet Feeder – Loading 45 ACP
This video shows setting up and loading 45 ACP with the new Hornady Lock-N-Load Bullet feeder on the Hornady Lock-N-Load AP press. Here’ I’ll show the preferred die setup from the following post: Hornady Lock-N-Load Bullet Feeder – Die Stations Thanks, Gavin
What’s next on Ultimate Reloader
AR-MPR Rifle during test fitting – Image copyright 2011 Ultimate Reloader Hey everyone, just wanted to take a moment to give you all a heads-up regarding what’s coming up here on Ultimate Reloader. 2011 is going to be an exciting year for sure! Among other things, we’ll look at the following: AR-MPR: Lower Build We’ve […]
Hornady Lock-N-Load Bullet Feeder – Die Stations
One important thing to consider when contemplating a bullet feed system is – “How am I going to setup my dies and powder measure, and do I really have room and enough stations to make this thing work?”. Well, those are good questions, and this post will discuss a few different die configurations on the […]
