Tag: Bullet Feeder

Frankford Arsenal X-10 Bullet Feeder: Unboxing, Setup, Loading 9mm

While I’ve done several stories with the Frankford Arsenal X-10 Progressive Press, I decided it was time for Ultimate Reloader’s Kyle Shields to set up the production version, and to add the new bullet feeder! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these […]

NEW from Mark 7 — Genesys and Titan at 2023 SHOT Show

Crowds gathered around the Lyman/Mark 7 booth at the 2023 SHOT Show for the unveiling of the Mark 7 Genesys and Mark 7 Titan. Lyman/Mark 7’s design engineer Spencer Karoll gives us the details.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). […]

XL-750 Bullet Feed SOLUTION (Double Alpha Extra-Short Powder Bar)

The Dillon XL-750 is an improved version of the XL-650- with the priming system changes alone being worth the upgrade (and then there are numerous other improvements as well). For a full list of differences/upgrades, check out my XL-650 -vs- XL-750 article and video (I cover the changes in detail). One issue I have encountered […]

Do I really need a bullet feeder?

So there you are sitting at your reloading bench cranking out some ammunition and a thought comes into your head. What if I added a bullet feeder to this press? I could really speed things up, and it would be fun to get a new press accessory! But you may also ask yourself: Will it […]

Hornady Bullet Feeder – Have you used it?

Hey everyone, just wanted to recap the information and videos that I’ve posted on the Hornady Bullet Feeder for pistol cartridges. Here are the previous posts related to this bullet feeder: Hornady Lock-N-Load Bullet Feeder – Loading 45 ACP Hornady Lock-N-Load Bullet Feeder – Die Stations Hornady Lock-N-Load Bullet Feeder – Overview Hornady Lock-N-Load Bullet […]

Hornady Lock-N-Load Bullet Feeder – Die Stations

One important thing to consider when contemplating a bullet feed system is – “How am I going to setup my dies and powder measure, and do I really have room and enough stations to make this thing work?”. Well, those are good questions, and this post will discuss a few different die configurations on the […]

Hornady Lock-N-Load Bullet Feeder – Overview

In my last related post –  Hornady Bullet Feed Dies – Overview I covered the basics of the bullet feed die that is integral to the new Hornady Lock-N-Load Bullet Feeder system. In this post, we’ll take a step back and look at a “high level” feature overview of this new product. The Complete Hornady […]

Hornady Bullet Feeder – In The Shop!

You may have noticed that retailers have finally started stocking the new Hornady Bullet Feeder for pistol reloading. This is an exciting release, because this is the first bullet feeder that’s the same “color” as the corresponding press and electric case feed system that it’s designed to work with. I have actually spent some time […]

What about plated bullets in the RCBS pistol bullet feeder?

You’ve probably seen and read about one of the cool new reloading products unveiled at last year’s SHOT show- the RCBS pistol bullet feeder. This attachment is a great way to increase your reloading efficiency. One of the limitations of this product is the fact that it does not work with cast lead bullets. The […]

SHOT Show 2010 news from RCBS: Rifle bullet feeder to be released this year

I’ve been testing and shooting videos of the RCBS Pistol Bullet Feeder- an exciting new product that was announced and demo’d at last year’s SHOT show. As of this writing I’ve tested it on the Dillon XL-650, The Hornady Lock-N-Load AP, and the RCBS Pro 2000. It’s a great product, and it really enhances pistol […]

For Commerical Inquiries:
Ulitmate Reloader Commercial Services



Reloading Safety

Polls