Lock-N-Load AP Specs
| |
Overview |
|
|
Manufacturer |
Hornady Manufacturing |
| |
Model |
Lock-N-Load AP |
| |
Press Type |
Progressive Auto-Indexing |
| |
Item code |
95100 |
| |
MSRP |
$499.54 |
| |
Warranty |
Lifetime |
| |
Year Introduced |
1995 |
| |
# of stations |
5 (true stations) |
| |
Maximum cartridge length |
2.5″ case, 3.4″ COL |
| |
Indexing |
Automatic, clockwise, 1/2 index increments, ball detent |
| |
Frame Construction |
Cast aluminum |
| |
Ram diameter |
2″ |
| |
Lubrication |
Zerc fittings (grease) |
| |
|
|
| |
|
|
| |
Dimensions (no case feed) |
|
|
Weight |
~22 lb |
| |
Width |
14″ |
| |
Depth |
9.5″ |
| |
Height (overall) |
34″ |
| |
Height (above bench) |
25.5″ |
| |
Height (below bench) |
9.5″ |
| |
Depth into bench |
4″ |
| |
|
|
| |
|
|
| |
Dimensions (with case feed) |
|
|
Weight |
~34lb |
| |
Width |
14″ |
| |
Depth |
16″ |
| |
Height (overall) |
46″ |
| |
Height (above bench) |
38″ |
| |
Height (below bench) |
9.5″ |
| |
Depth into bench |
9″ |
| |
|
|
| |
|
|
| |
Press mounting |
|
|
Hole pattern |
2, 4″ between centers 5/16″ bolts reccomended |
| |
Notes |
See mounting details page |
| |
|
|
| |
Dies, shellplates, case retention |
|
|
Die mounting |
Lock-n-Load bushing system (drop in and rotate 1/8 turn) |
| |
Die compatibility |
All standard 7/8″ 14 TPI dies in all stations (Some Lee dies require bottoming out) |
| |
Shellplate type |
EZ-Ject, center bolt |
| |
Case retention |
Circumferential spring (singular) spans all stations |
| |
|
|
| |
|
|
| |
Priming system |
|
|
Type |
Vertical tube, on-demand, primer slider pickup |
| |
Capacity |
100 |
| |
Loading |
Primer pickup tubes (included, one small one large) |
| |
Low primer warning |
Not available |
| |
Notes |
Anti-crush design, isolated primer at priming station (safe design) |
| |
|
|
| |
|
|
| |
Powder measure |
|
|
Type |
Rotating drum |
| |
Case Activated |
Yes |
| |
Capacity |
~22 cu in, ~360 cc |
| |
Baffle |
Yes, drop-in |
| |
Case mouth expansion |
Optional with PTX expander inserts |
| |
Cavity changeover |
Lock-n-load metering inserts, separate drums for rifle and pistol (rifle and pistol drum included) |
| |
Micrometer |
Optional (separate rifle and pistol micrometer inserts) |
| |
Failsafe |
Spring return (no return rod) |
| |
Notes |
Quick dump with lock-n-load bushing system |
| |
|
|
| |
|
|
| |
Case Feeder |
|
|
Manufacturer |
Hornady Manufacturing |
| |
Item code |
95300 (120v), 95302 (220v) |
| |
MSRP |
$431.99 |
| |
Warranty |
Lifetime |
| |
Voltage |
120V / 220V |
| |
Type |
Rotary disk collator |
| |
Weight |
14 lb |
| |
Capacity |
~400 .223, ~705 9mm or 45 ACP |
| |
Supported cartridge types |
Rifle, Pistol |
| |
Notes |
Case feed plates are interchangeable with Dillon case feeder plates |
This entry was posted
on Monday, May 3rd, 2010 at 12:20 pm and is filed under Hornady Lock-N-Load AP Info Center.
You can follow any responses to this entry through the RSS 2.0 feed.
Responses are currently closed, but you can trackback from your own site.
