Category: Reloading Blog

Just released today is Berger’s brand-new 6mm 120-Grain Long Range Hybrid Target Bullet (LRHT). This bullet is heaviest-in-class and designed for 1:7 to 1:7.5 twist barrels with an impressive 0.328 G7 BC. Watch and read on to learn more about this impressive new projectile! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading […]

CVA’s Endura is not your traditional muzzleloader. This unique precision system doesn’t just take blackpowder, but is compatible with specific smokeless powders as well! (See CVA’s approved propellants here.) This is my very first muzzleloader, and I was excited to be able to customize it and shoot it long range!  Disclaimer Ultimate Reloader LLC / […]

The all-new RCBS MatchMaster Duo Die Set is here, and in this video we take a closer look at what makes these dies unique. From the premium full-length sizing die to the MatchMaster micrometer seating die with top-load bullet window, this setup is built for precision and ease of use.  Disclaimer Ultimate Reloader LLC / […]

Perhaps ensuring you have all of the equipment you need is the most daunting part about entering the world of reloading. While there are many kits and options available, the RCBS Rock Chucker Supreme Elite kit offers one of the world’s most iconic presses in a comprehensive package that contains everything you need to load […]

While progressive reloading is faster, many shooters have wondered if they are trading accuracy for speed. In this video, I run a direct test at 600 yards, comparing ammunition loaded on my Short Action Customs single-stage to ammunition loaded on my Dillon 550. Watch and read on for the results!  Disclaimer Ultimate Reloader LLC / […]

How much does muzzle brake diameter actually matter? Do angled ports really reduce more recoil than straight ports? In this video, we put both theories to the test using our advanced recoil rig to compare the Hawkins Precision Tank ST and Backdraft muzzle brakes across both 6.5 Creedmoor and 300 Win Mag platforms. The results […]

What John-Kyle Truitt thought would be a 6-month process turned into a 3-year journey. In this two-part series, we discuss the birth and evolution of the Hybrid line of stocks from Foundation. They set out to make a lightweight hunting stock with the same feel as their traditional offerings. Foundation is known for their Micarta, […]

Athlon’s Ares HLR 2.5-15xx42 APRS-H2 SFP IR MIL is a turn-key, affordable rifle scope well-suited for hunting. It has a wide magnification range, illumination, and performed well on our optics test rig and on our custom 25 Creedmoor hunting rifle. Watch to see it for yourself! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

Shooting subsonic 45-70 ammo is fun and useful, but relying on factory ammunition gets expensive. Here’s how to use our “cheat code” to load and shoot subsonic 45-70 ammunition and save a LOT of money doing so.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you […]

My reloading journey started with loading 30-30 rifle ammunition. When it came time to start reloading pistol ammunition at Ultimate Reloader, I realized there were a few things I needed to keep in mind when choosing dies. Here is everything I wish I knew when I started!  Disclaimer Ultimate Reloader LLC / Making with Metal […]

Caldwell’s Flash Bang target hit indicators have completely transformed our long range shooting experiences and ability to call hits. We used a number of the original model during the Rock Chuck Olympics, and the batteries are still holding on Harold at 1,390 three years later! In this video, I’ll explore the new features Caldwell has […]

Though designed to promote long-range accuracy, the WOOX Exactus isn’t exclusively for long range rigs. I upgraded a Ruger 10/22 with this stock and couldn’t be happier with the results!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

We’ve done a lot of work with Ultradyne’s UD Chassis – this time we are putting together a Remington 700 PRS rifle with the UD Picatinny chassis!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

ARs are fun to shoot, but shooting in volume can add up. You don’t need heavy bullets for general plinking and close targets. I decided to try out Berry’s jacketed 55-grain and 62-grain 223 bullets with the goal of creating accurate, budget-friendly ammunition. Here’s how I put it together!  Disclaimer Ultimate Reloader LLC / Making […]

The 25 Creedmoor is quickly gaining traction as a do-it-all cartridge—offering the low recoil of a 6mm with the impact and versatility of a 6.5. We’ve done some testing with handloads —with excellent results —but what about factory ammo? I recently tested a range of new Hornady factory ammo to see how it performs across […]

I’ve long preferred bench priming for bench reloading. Others vehemently support on-press priming and hand-priming has its place. Like much of reloading, it comes down to personal preference. Hornady’s new Versa-Prime features an adjustable-depth stop in a robust bench-priming package. I’m eager to see how I like it!  Disclaimer Ultimate Reloader LLC / Making with […]